Using thermal analysis with kinetic calculation method to assess the thermal stability of azo compound on construction materials

The application of construction polymers in engineering and alternative materials has always occupied a place in the market. In the production process of polymer resins, initiators can be used to lower the polymerization reaction energy threshold, which can improve reaction efficiency and reduce energy loss. However, as a commonly used energetic substance in the polymerization process, azos have caused related process hazards due to their exothermic characteristics. Because of this, it is essential to examine and analyze the thermal hazard characteristics of emerging azo substances, such as 2-cyanopropan-2-imemicarbazide (CABN). Although previous literature performs the calculation on related thermal hazard parameters of CABN, there is still exists a void for discussion in estimating the reaction model to avoid analogous hazards and enhance the existing thermal analysis. Based on the past literature, the reaction model is improved with thermogravimetric analysis as evidence. The revised thermal hazard parameters are calculated as the basis of control and mitigation measures, the kinetic model is used to estimate the modified safety parameters, and in the judgment of the runaway reaction, the critical temperature of the runaway is found by analyzing the influence of slight changes in ambient temperature on the reaction temperature. The results show that the critical temperature that causes CABN to enter the runaway reaction is delayed, and the hazard is lower than in the storage situation. Therefore, the thermal hazard to CABN mainly focuses on the safety environment and measures during storage.     

保水剂性能及其农用安全性评价研究进展

保水剂能够吸收其自身体积和重量数倍的水分从而增加土壤含水率、改善土壤团粒结构、提高肥料利用效率,促进农作物生长,在节水农业生产等方面具有广泛的潜在应用价值.本文介绍了国内外保水剂的种类、性能、在农业中的应用等方面的最新研究进展,评述了保水剂对土壤的物理性质、作物生长的影响,并指出其中存在的问题.鉴于保水剂使用不当对土壤环境曾造成危害,因此本文提出在保水剂的应用环节中,在注重其保水性能的同时,还应借鉴化学品环境安全评价的方法,系统评估保水剂的使用对土壤生态可能造成的影响,特别是对土壤微生物生态的影响,避免盲目投入造成的土壤板结、土壤肥力下降等不利影响,填补保水剂对环境影响研究的空白.     

酸热处理提剩余污泥胞外聚合物的条件优化

以蛋白质浓度、多糖浓度和DNA浓度为表征,对酸热法提取剩余活性污泥中的胞外聚合物进行了条件优化,考察了pH值、温度和提取时间对破解剩余污泥细胞提胞外聚合物(EPS)效率影响的最优条件,并对EPS提取液进行FT-IR分析。结果表明,影响提取效率大小为pH值>温度>提取时间,酸热处理提胞外聚合物的最佳条件为pH=1.25,T=100℃,t=4 h。     

砷(Ⅲ)离子印迹聚合物的制备及吸附性能研究

以磁性氧化石墨烯为载体,砷离子(As(Ⅲ))为模板离子,3-巯基丙基三甲氧基硅烷(MPTS)为功能单体,正硅酸乙酯(TEOS)为交联剂合成了As(Ⅲ)离子印迹磁性氧化石墨烯纳米材料(MGO-IIP),并使用扫描电子显微镜、傅里叶变换红外光谱(FTIR)、X-射线衍射仪(XRD)和振动样品磁强计对合成材料进行了表征.同时,考察了MGO-IIP对As(Ⅲ)的吸附特性.结果表明:318 K下MGO-IIP对As(Ⅲ)的最大吸附量为148.1 mg·g~(-1),仅20 min即可达到吸附平衡,印迹因子为2.35;吸附过程服从Langmuir模型和准二级动力学模型,说明是自发的吸热过程;在其他干扰离子存在的情况下,MGO-IIP对As(Ⅲ)仍然具有良好的吸附效果,且能够重复使用4次,在含砷废水处理中具有应用价值.MGO-IIP材料对As(Ⅲ)的吸附机制为表面络合作用及物理吸附.     

基于HBPs接枝的PVDF膜亲水改性及抗污染性能

在聚偏氟乙烯（PVDF）微滤膜表面接枝超支化聚合物聚乙烯亚胺（HPEI）,并通过环氧丙醇与氨基的开环反应在PVDF膜表面形成高密度的多羟基结构,实现PVDF膜的亲水改性.实验对膜的表面亲水性、抗粘附性能和抗污染性能进行表征,并采用原子力显微镜（AFM）测量膜与污染物探针之间的粘附力以进一步探究改性膜的抗污染机理.实验结果显示,改性后,PVDF膜的接触角从85°减小至42°,润湿时间从20s缩短至10s,表面亲水性显著提高;在静态吸附实验中,改性膜表面粘附的蛋白质和多糖数量明显减少;在动态污染实验中,改性膜的水通量恢复率（FRR）较高,不可逆通量下降率（IFR）较低,说明其较强的抗污染性能.AFM界面粘附力的测试结果表明污染物探针与改性膜面的粘附力较弱,进一步证实改性膜表面丰富的亲水基团以及超支化结构的位阻效应可以有效改善PVDF膜的抗污染性能.     

Synthesis of core-shell magnetic molecular imprinted polymer by the surface RAFT polymerization for the fast and selective removal of endocrine disrupting chemicals from aqueous solutions

In this study, we present a general protocol for the making of surface-imprinted core-shell magnetic beads via reversible addition-fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized iron oxide nanoparticles as the chain transfer agent. The resulting composites were characterized by X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) analysis, thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The surface-imprinted magnetic beads were demonstrated with a homogeneous polymer films (thickness of about 22 nm), spherical shape, and exhibited magnetic property (Ms = 0.41 mA m² g⁻¹) and thermal stability. Rebinding experiments were carried out to determine the specific binding capacity and selective recognition. The as-synthesized surface-imprinted core-shell magnetic beads showed outstanding affinity and selectivity towards bisphenol A over structurally related compounds, and easily reach the magnetic separation under an external magnetic field. In addition, the resulting composites reusability without obviously deterioration in performance was demonstrated at least five repeated cycles.     

Application of nanobalance technique and principal component analysis for detection of the soil fumigant Telone residues in the air

Quartz crystal nanobalance (QCN) technique is considered as a powerful mass sensitive sensor for monitoring of materials in the sub-nanogram level. In the current study, a method based on QCN technique developed to determine Telone in air. Various coating materials including methyl phenyl silicon, 75% phenyl (OV25) and molecularly imprinted polymer (MIP) were employed. The frequency shift of OV25-modified quartz crystal was found to be linear against organohalogen compounds [Telone (soil fumigant), Koril (Herbicide), Endosulfan (organochlorine insecticide) and Chloroform (solvent)] concentrations in the range of 2.4 to 48 mg L^?1 for Telone vapor and 4.8–24 mg L^?1 for three other vapors. The correlation coefficients for Telone, Koril, Endosulfan and Chloroform were 0.992, 0.996, 0.989 and 0.991, respectively. The principal component analysis was also utilized to process the frequency response data of the organic vapors. Using principal component analysis, it was found that more than 93.85% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful discrimination of Telone and other compounds was quite possible through the principal component analysis of the transient responses of the OV25-modified electrode. In the second method, a molecularly imprinted polymer-coated sensor for Telone was developed. Molecularly imprinted polymer coated quartz crystal (MIP-QCN) showed a selective response to Telone and gave a linear relationship between frequency shift and amount of Telone from 1 to 48 mg L^?1. In this investigation, the proficiency of MIP-QCN and OV25-modified QCN sensors were compared.     

妊娠期全氟辛酸染毒对子代雄鼠发育毒性的研究

探讨妊娠期染毒全氟辛酸(perfluorooctanoic acid,PFOA)对子代雄鼠发育毒性的影响.将50只妊娠0 d小鼠随机分5组,每组10只,妊娠0~17 d每天按0、1、2.5、5和12.5 mg·kg~(-1)BW饲喂PFOA,产后仔鼠正常饲养,记录仔鼠存活数.产后21 d,检测仔鼠血清睾酮水平并计算睾丸指数;HE染色观察睾丸组织结构变化;RT-PCR法检测睾丸组织Dlk1-Dio3印记基因簇各目的基因mRNA的表达情况.结果显示,随PFOA染毒剂量增加,仔鼠存活数显著降低,血清睾酮含量极显著性降低(p0.01);睾丸指数无统计学意义;睾丸组织有不同程度的损伤并呈剂量依赖性;Dlk1-Dio3印记基因簇各目的基因的表达量都有降低趋势,其中Gtl2、Rian、Dio3均显著性降低(p0.05).结果表明,妊娠期染毒PFOA能够降低仔鼠存活数,损伤睾丸组织结构,并能够扰乱生殖激素,降低睾丸组织Dlk1-Dio3印记基因簇各目的基因mRNA的表达.     

多壁碳纳米管表面共价偶联分子印迹聚合物及其对水中双酚A的吸附性能

通过羧化、酰氯化、酰胺化反应在多壁碳纳米管(MWCNTs)表面引入不饱和侧链(－CH＝CH2),然后以双酚A(BPA)为模板分子,4-乙烯吡啶(4-VP)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,在MWCNTs－CH＝CH2表面制备一种新型的分子印迹聚合物纳米材料.采用扫描电镜、傅里叶变换红外光谱(FT-IR)、热重分析对制备吸附剂(MWCNTs@BPA-MIPs)的结构与形态进行了表征且证实有一层稳定的分子印迹聚合物(MIPs)接枝在MWCNTs的表面通过平衡结合实验与斯卡查德(Scatchard)分析证实了印迹聚合物的吸附性质.结果证实,BPA的吸附容量高达123.8 mg·g-1,而且与模板分子BPA的类似物双酚C(BPC)和邻硝基酚(o-NP)比较,MWCNTs@BPA-MIPs对BPA具有更好的选择性和更快的吸附动力学特性.     

利用可生物降解聚合物为碳源和生物膜载体脱氮及其动力学特性研究

以闭合循环养殖系统去除硝酸盐为目的,研究了以一种非水溶性可生物降解多聚物材料(BDPs)PBS颗粒作为反硝化碳源和生物膜载体的填料床反应器对于废水中硝酸盐的去除效果及动力学特征.结果表明,在温度为(29±1)℃,进水NO 3--N浓度为25～334 mg/L的条件下,进水NO 3--N负荷0.107～1.098 kg/(m3.d)为最适进水负荷.当进水负荷为1.098 kg/(m3.d)时,可达到最大NO 3--N体积去除负荷0.577 kg/(m3.d).进一步增加进水NO 3--N负荷则NO 3--N体积去除负荷开始下降.动力学研究结果表明,以PBS作为碳源和生物膜载体的反硝化速率遵循一级反应动力学.用Eckenfelder模型拟合,并求出常数n值和K值,建立的动力学模型采用该参数可以预测出水NO 3--N浓度.对模型的预测值与实际值采用统计软件SPSS16.0做方差分析表明,p0.05,分别为p=0.5530.05和p=0.6320.05,模型预测值与实际值无显著性差异.